Brewing A Product With One Button; Brewing Two Products With One Button (Possible Only When Using Coffee Beans); Adjustment Of Coffee Length In The Cup During Preparation; Milk Frother - Gaggia ANIMA DELUXE Bedienungsanleitung

6.1.2

Brewing a product with one button

6.1.3

Brewing two products with one button (possible only when using coffee beans)

2X
2X
6.1.4

Adjustment of coffee length in the cup during preparation

M
E
M
O
M
E
M
O
6.2

Milk frother

>
Press the AROMA STRENGTH button repeatedly, to select the pre-ground coffee
brewing function.
Proceed by following the further instructions on the preparation of the desired
specialty.
> Place one cup under the coffee dispensing spout.
One espresso/one espresso lungo
> To brew one espresso, press the ESPRESSO button.
>
Otherwise, to brew one espresso lungo, press the ESPRESSO LUNGO button.
After the pre-infusion cycle, coffee starts pouring from the coffee dispensing spout.
Coffee will be brewed to a preset level; it is possible, however, to stop brewing it
before this level is reached, by pressing the OK button.
After the product has been brewed, the machine goes back to the main menu.
Place two cups under the coffee dispensing spout.
>
Two espresso/two espresso lungo
To brew two espresso, press the ESPRESSO button twice.
>
>
Otherwise, to brew two espresso lungo, press the ESPRESSO LUNGO button twice.
After the pre-infusion cycle, coffee starts pouring from the coffee dispensing spout.
The machine carries out two grinding cycles in sequence.
Coffee will be brewed to a preset level; it is possible, however, to stop brewing it
before this level is reached, by pressing the OK button.
After the product has been brewed, the machine goes back to the main menu.
It is possible to adjust the quantity of product brewed according to one's taste and
the size of the cups. This function makes it possible to change the default setting for
the quantity of product brewed in the cup. For a stronger taste, reduce the brewed
quantity. Prepare the machine for one espresso / espresso lungo and place a cup
under the coffee dispensing spout.
Espresso length/espresso lungo length
To adjust the espresso length, keep the ESPRESSO button pressed until the MEMO
>
symbol is displayed, then release the button.
>
Otherwise, to adjust the espresso lungo length, keep the ESPRESSO LUNGO button
pressed until the MEMO symbol is displayed, then release the button.
The machine is in the programming stage and is starting to brew the chosen
product.
>
Press the OK button as soon as the desired quantity has been reached.
Now the button is programmed: every time it is pressed, the machine will brew the
product in the quantity just set. After the product has been brewed, the machine goes
back to the main menu.
This chapter explains how to use the milk frother to prepare frothed milk. When using
the machine for the first time, clean it accurately as described in the "7.4.1 Milk frother
cleaning cycle" chapter.
Burning hazard! At the beginning of each product brewing, hot water or steam sprays
might be present. The milk frother may reach high temperatures. Never touch it with
bare hands. Use the appropriate protective handle.
Water circuit cleaning
Check that the automatic milk frother is not installed.
>
>
Press the MILK FROTH button to dispense steam for a few seconds.
>
To stop dispensing, press the OK button.
9
ENGLISH