Catpro2-Ps/2« Target Module; Scope Of Delivery; Installation; Required Accessory - Guntermann & Drunck CompactCenter X2 Installationsanleitung

»CATpro2-PS/2« target module
The CATpro2-PS/2 target module enables you to integrate a computer with analog
video output into a CompactCenter system.

Scope of delivery

 1 × CATpro2-PS/2 target module

Installation

The following paragraphs explain the required steps to install the target module.

Required accessory

 One category 5 (or better) twisted pair cable to connect the CATpro2-PS/2 target
module to a CompactCenter system.

Connecting the target computer




Figure 1: Legend of CATpro2-PS/2 target module
 Monitor: Insert the 15-pin D-Sub HD plug into the VGA interface of the target
computer.
Insert the PS/2 plug into the PS/2 keyboard interface of the target
 PS/2 Keyboard:
computer.
Insert the PS/2 plug into the PS/2 mouse interface of the target com-
 PS/2 Mouse:
puter.

Connection to matrix switch

Use a category 5 (or better) twisted pair cabling to connect this inter-
 Transmission:
face to a CPU port of the CompactCenter system (see figure on page 4).
Target modules » CATpro2-PS/2
G&D CompactCenter X2 · 13
