Status Displays; Front Panel; Back Panel - Guntermann & Drunck UCON-Audio Installationsanleitung

Status displays

Status displays

Front panel

Figure 2: Front view of the user module
The LEDs on the front panel of the user module enable you to always control the
operating status of the system.
Area LED
Power Red.
Main
Remote Active
Status
Table 2: Status displays at the user module

Back panel

Figure 3: Back view of the user module
The Transmission interface on the back panel of the user module provides additional
status LEDs. These LEDs have the following meaning:
Area LED
Trans- yellow
mission
green
Table 3: Status displays at the user module
5 · G&D UCON-Audio
Meaning
An external power pack is connected
Voltage is being supplied.
 Is lighting up if a keyboard has been initialised.
 Is blinking if no keyboard has been initialised.
The CATCenter system is ready for operation.
Meaning
The port is currently occupied by the user.
The connection to the CATCenter system has been estab-
lished.