Advanced Functions; Transmitting Keyboard And/Or Mouse Signals To All Computers (Broadcast) - Guntermann & Drunck DVIMUX8-OSD-PS/2 Installationsanleitung

Advanced functions

Transmitting keyboard and/or mouse signals to all
computers (Broadcast)
In the default settings of the KVM switch, the console keyboard and mouse signals
are transmitted only to the active computer.
After you enable the Broadcast mode, you can transmit the keyboard and/or mouse
signals to all eight channels. A pop-up window on the console monitor informs you
that the function is enabled successfully.
NOTE: Transmitting keyboard and/or mouse signals to the computers of a slave
switch is not supported.
You can use the Broadcast function, for example, to send key combinations to close
all open windows at all computers or to reset all computers by using the keyboard.
You need to configure the Broadcast mode before you can use it (see page 39).
How to start the Broadcast mode:
1. Press Ctrl+Num (Standard) to open the On-Screen Display.
2. Press to open the menu.
F1
3. Use the
Arrow keys
ADVICE: After you open the on-screen display, press
How to stop the Broadcast mode:
1. Press Ctrl+Num (standard) to open the On-Screen Display.
2. Press F1 to open the menu.
3. Use the
Arrow keys
ADVICE: After you open the on-screen display, press
to select , and press
Broadcast
to select and press
Broadcast
Advanced functions
.
Enter
to start the Broadcast mode.
F11
.
Enter
to start the Broadcast mode.
F11
G&D DVIMUX8-OSD-PS/2 · 18