Changing the double hotkey
If the use of double hotkeys is enabled (see page 17), press the double hotkey and the
Backspace
key simultaneously to start the setup mode DVIVision system.
If an application program or another G&D device uses the same hotkey within the
cascade, the hotkey can be changed.
How to change the current double hotkey:
1. Requirement: Enabling of double hotkeys (see page 17).
2. Press
Double Hotkey+Backspace
setup mode. If the hotkey delay is active, press the key combination for
seven seconds.
3. Press one of the setup keys listed below to enable the desired double hotkey:
Enables
Ctrl
Alt
Enables
Alt Gr
Enables
Enables
Win
Shift
Enables
1. Requirement: Enabling of double hotkeys (see page 17).
2. Use the terminal emulator to establish the connection to the DVIVision system.
3. Use the
arrow
4. Press
repeatedly) to enable the desired double hotkey:
Space
Enables
Ctrl + Shift
Alt + Shift
Enables
Alt Gr + Ctrl
Enables
Enables
Win + Ctrl
Shift + Win
Enables
5. Press the
key to save your settings.
S
Related topic:
Using single or double hotkeys on page 17
(default:
as double hotkey
Ctrl+Shift
Alt+Shift
as double hotkey
Alt Gr+Ctrl
as double hotkey
as double hotkey
Win+Ctrl
Shift+Win
as double hotkey
keys to select
Hotkey
.
as double hotkey
Ctrl+Shift
Alt+Shift
as double hotkey
Alt Gr+Ctrl
as double hotkey
as double hotkey
Win+Ctrl
Shift+Win
as double hotkey
Ctrl+Shift+Backspace
) to enable the
G&D DVIVision · 19
Configuration