Key Lock; Dual Watch - DNT Young500 Bedienungsanleitung

General operation
Press the UP button to scan the channels 1-8.
Press the DOWN button to scan the sub-channels.
When the radio detects channel activity, it stops scanning and stays at
that channel. If you press the PTT button you can talk on this channel
but if the talking stops for more than 4 seconds, the scanning starts
again.

Key lock

This function allows to lock the buttonpad, to avoid accidental unwanted
commands. To enable / disable the button lock function proceed as fol-
lows:
Press the Menu button for approx. 3 second until the key lock icon
appears/disappears on the display.
If the button lock function is activated, only the PTT and Call
button can be used. To disable the function proceed in the
same way.

Dual Watch

(PMR mode only)
The dual watch allows listening to a second channel
Set main channel fi rst (example channel 2)
Press Menu button 9 times, LCD display shows the DCM icon and the
channel number display fl ashes.
Press Up-/Down button to select your desired watch channel (example
channel 6) .
Press the PTT button to confi rm, the unit will watch channel 2 and 6
by shift. LCD fl ashes between channel 2 and 6.
To turn the dual watch off press Menu button 9 times. LCD display
shows the DCM icon and the channel number display fl ashes.
Press Up-/Down button to select channel number to 0F to turn off this
function.
- 34 -