Use Swing Digital; Use Swing Digital Standard Version; Use Swing Digital Lr - HumanTechnik Swing digital Bedienungsanleitung

Use Swing digital

Use SWING digital standard version

Please follow the instruction to use your SWING digital:
1. Switch your sound source on (e.g. TV).
2. Adjust the volume level controller 1 initially to a low volume to protect your
ears. The volume increases when you turn the dial into the direction of "5"
and it decreases when you turn the dial into the direction of "0".
3. Please put the headphone on. By spreading the speaker arms, the head-
phone switches automatically on. The green LED 4 always indicates that
the receiver is switched on.
4. The blue LED bar 21 is illuminated as soon as the sender has contact
and transmits to the receiver.
5. Set the desired volume 1.
6. If you remove the headphone then it will be switched off automatically.
We ecommend to put the headphone always back into the sender to
ensure that the battery is always charged.

Use SWING digital LR

Please follow the instruction to use your SWING digital:
1. Switch your sound source on (e.g. TV).
2. Adjust the volume level controller 9 initially to a low volume to protect your
ears. The volume increases when you turn the dial into the direction of "5"
and it decreases when you turn the dial into the direction of "0".
3. Ensure that the ring loop lock has been closed completely. The ring loop
lock is used to comfortably wear the device and to minimize accidents.
4. The receiver will be switched on and off by using the ON/OFF switch on
the back. Caution: Always switch the receiver off after use because the
battery discharges itself otherwise. The green LED 13 always indicates
that the receiver is switched on.
5. The blue LED bar 21 is illuminated as soon as the sender has contact
and transmits to the receiver.
6. Set the desired volume.
7. Switch the receiver off after use. We recommend to put the receiver al-
ways back into the sender to ensure that the battery is always charged.
English 32