Firmware; Factory Defaults - MSI RG60SE Bedienungsanleitung

5.11.2 Firmware

The page (shown in figure 5-49) allows you to upgrade the latest version firmware to
keep your router up-to-date.
New firmware is posted at
router is not experiencing difficulties, there is no need to upgrade firmware, unless the
new firmware supports a new feature you need.
Note: When you upgrade the router's firmware, you will lose current configuration
settings, so make sure you backup the router's settings before you upgrade its
firmware.
To upgrade the router's firmware, follow these instructions:
1. Download the
(www.msi-computer.de).
2. Click Browse to view the folders and select the downloaded file.
3. Click the Upgrade button.
Firmware Version - Displays the current firmware version.
Hardware Version - Displays the current hardware version. The hardware version of
the upgrade file must accord with the current hardware version.
Note:
1. Do not turn off the router or press the Reset button while the firmware is
being upgraded.
2. The router will reboot after the Upgrading has been finished.

5.11.3 Factory Defaults

This page (shown in figure 5-50) allows you to restore the factory default settings for the
router.
Click the Restore button to reset all configuration settings to their default values.
•
The default User Name: admin
•
The default Password: admin
•
The default IP Address: 192.168.1.1
RG60SE
Figure 5-49 Firmware Upgrade
www.msi-computer.de
latest firmware upgrade
Figure 5-50 Restore Factory Default
- 52 -
108M Wireless Router User Guide
and can be downloaded for free. If the
file from the MSI website