Muting The Sound (Mute); Changing The Brightness Of The Front Panel Display; To Use Headphones - Yamaha MCR-840 Bedienungsanleitung

SYSTEM OPERATIONS
To turn off Pure Direct mode
Press PURE DIRECT again. The PURE DIRECT
backlight turns off and the front panel display turns on.

■ Muting the sound (MUTE)

Press MUTE to reduce the current volume level
by approximately 20dB.
"MUTE ON" appears on the front panel display.
Press MUTE again to restore the audio output to the
previous volume level.
Changing the brightness of the
front panel display
You can dim the front panel display of the receiver. The
front panel display of the DVD player also dims by the
system control connection (☞p.8). (The default setting is
"DIMMER OFF".)
Press DIMMER.
You can choose your desired brightness of the front panel
display between normal (bright), mid dim, and dim.

To use headphones

You can connect your headphones to the PHONES jack on
the front panel of the receiver.
The sound from the speakers and the subwoofer stops.
INPUT
PHONES
18
En
DIMMER