Fronius Selectiva 1006 Bedienungsanleitung Seite 31

Switch on an interior lamp (approx. 2-15 W)
2
Set selector switch to correct position
3
Connect charger lead to the correct vehicle pole terminals
4
Connect charger to mains supply
5
IMPORTANT! Risk of short circuit - the vehicle pole terminals must not touch during the
next step.
Loosen vehicle pole terminals carefully from the battery poles
6
Charger supplies the in-car electronics
7
Change battery
8
Connect vehicle pole terminals to correct poles of the new battery
9
Unplug the charger from the mains
10
Remove charger lead from the vehicle pole terminals
11
31