Child-Proof Lock; Changing The Programme After It Has Started - Beko DPU 7306 XE Bedienungsanleitung

Operating the product

5.14 Child-proof Lock

Machine is equipped with a Child-proof Lock
which prevents interfering with the current
programme flow by pressing any button. All
buttons except the On / Off button on the control
panel are disabled when the Child-proof Lock is
active.
To activate the childproof lock:
Press Audio Warning and Anti-Creasing buttons
simultaneously for 3 seconds.
To start a new programme after the current
programme is over or to interrupt the current
programme, Child-proof Lock should be
deactivated. To deactivate the childproof lock:
Press Audio Warning and Anti-Creasing buttons
simultaneously for 3 seconds.
C
Lock symbol will appear on the display
when Child-proof Lock is activated.
C
Child-proof lock is deactivated when the
machine is switched off and on with On /
Off button.
When the Child-proof Lock is activated:
ƒ Display symbols will not change even if the
position of programme selection knob is
changed while the machine is running or in
halt.
If the child-proof lock is deactivated after
ƒ
changing the position of programme
selection knob while your machine is running,
your machine stops and new programme
information is displayed.
56 / 64 EN
5.15 Changing the programme after it
has started
After the machine starts, you can change the
selected programme and dry your laundry in a
different programme.
1. If you want to select the Extra Dry programme
instead of Iron Dry programme, press and
hold the Start / Pause / Cancel button for 3
seconds to cancel the programme.
2. Select Extra Dry programme by turning the
Programme Selection knob.
3. Press Start / Pause / Cancel button to start
the programme.
C
You can also select a new programme
by turning the Programme Selection
knob while the machine is operating. In
this case, currently running programme is
aborted and new programme information
appears on the display.
Adding / removing laundry in Pause mode
In order to add or take out laundry after the drying
programme has started:
1. Press Start / Pause / Cancel button to
switch the machine to Pause mode. Drying
process will stop.
2. While in Pause mode, open the loading door,
add or take out laundry and close the loading
door.
3. Press Start / Pause / Cancel button to start
the programme.
Dryer / User Manual