Assembly; Assembling The Curved Handle; Assembling The Grass Box; Operation - Grizzly ERM 1231 G Originalbetriebsanleitung

GB
8 Cable holder
9 Extension cable outlet
10 Release button
11 Cable strain relief
12 Start lever

Assembly

Disconnect the plug before any
work on the equipment. There is a
risk of injury.

Assembling the Curved Handle

B
1. Insert the lower bar (3) into the slot
on the lawnmower housing (6).
2. Fix the bar (3) using the en-
closed screws (13).
C
3. Fix the curved handle (1) using
the enclosed screws (14) and the
wing nuts (2) on the lower bar (3).
There are two possible positions.
4. Clip the cable holder (8) into the
bar (3) and thus fix the cable.
When both wing nuts are loosened,
the curved handle can be folded down
for storing the equipment. Ensure that
the power cable is not caught.

Assembling the Grass Box

D
1. Connect the two pieces of the
collection box (16).
2. Connect the handle (15) in one
of the two pieces of the collec-
tion box (16).
Do not work with the lawnmower
without the collision guard or lawn
box. There is a risk of injury.
44

Operation

Hanging On / Removing the
Grass Box
E 1. To hang on the grass box (4), lift
the collision guard (7) and hang
on the grass box. Fold the col-
lision guard (7) onto the grass
box (4). It holds the grass box in
the correct position.
2. To remove the grass box (4),
lift the collision guard (7) and
detach the grass box. Fold the
collision guard (7) back onto the
mower housing (6).

Adjusting the Cut Height

Switch off the equipment, discon-
nect the plug and wait for the blade
to stop. There is a risk of injury.
The lawn mower can be adjusted to the
following cutting heights by changing the
position of the wheels:
60 mm - Tall cutting height
45 mm - Medium cutting height
30 mm - Short cutting height
F 1. Unscrew the wheels (5).
2. Firmly re-secure the wheels
(5) in the required position. All
wheels must be adjusted at the
same level.
The correct height is around 30 � 45 mm
for a decorative lawn and around
mm for a used lawn.
A higher cut height should be se-
lected for the first cut of the season.
45 - 60