NEFF E 3491-Serie Gebrauchs- Und Montageanweisung Seite 66

Installation:
The range may only be installed in
currentless condition.
For example by turning off the fuse for the
household interior installations.
Work top cut-out for built-in hob must
be present for the built-in hob (see
installation instructions for built-in hob).
1. Shove the built-in cooker into the
installation opening of the conversion
cabinet and align horizontally.
Important for function and safety:
Slide in built-in cooker completely.
Open oven door and fasten the built-in
cooker to the side strips on the
conversion cabinet with one screw
each (see illustration).
The two screws enclosed to the built-in
cooker must be inclined slightly to the
outside when they are screwed in.
Check whether the built-in cooker has
been installed solidly and horizontally
and whether the given installation
dimensions have been observed.
The properly installed appliance must be
covered in such a way on all sides that it
cannot come into contact even with
factory-insulated parts. The covering
must be able to be removed only with
the aid of tools.
2. Make the electrical connection between
the built-in cooker and hob through
connection plug and socket strip with
earthing cable.
3. Installing the hob.
Make absolutely certain that you
observe assembly instructions enclosed
to the appliance.
4. Make electrical connection between the
built-in cooker and safety plug socket
through mains connection plug.
5. Function control.
66
Assembly Instructions
15
585
30-50