Drilling holes in concrete or tile
Drill bit (slender shaft)
Outer dia.
Overall length
3.4 mm
90 mm
3.5 mm
SDS-plus Drill bit
Outer dia.
Overall length
4.0 mm
110 mm
110 mm
5.0 mm
160 mm
5.5 mm
110 mm
6.5 mm
160 mm
7.0 mm
160 mm
8.0 mm
160 mm
8.5 mm
160 mm
9.0 mm
160 mm
166 mm
12.0 mm
260 mm
12.7 mm
166 mm
14.0 mm
166 mm
15.0 mm
166 mm
166 mm
16.0 mm
260 mm
Drilling anchor holes
Taper shank adapter
Taper mode
Morse taper No.1
A-Taper
Anchor setting
Anchor setting adapter
Anchor size
W 5/16"
Optional accessories are subject to change without notice.
APPLICATIONS
Rotation and hammering function
Drilling anchor holes
Drilling holes in concrete
Drilling holes in tile
Rotation only function
Drilling in steel or wood
(with optional accessories)
Tightening machine screws, wood screws
(with optional accessories)
Effective length
45 mm
Effective length
50 mm
50 mm
100 mm
50 mm
100 mm
100 mm
100 mm
100 mm
100 mm
100 mm
200 mm
100 mm
100 mm
100 mm
100 mm
200 mm
B-taper
W 1/4"
W 3/8"
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latches
(2 pcs.) to remove the battery (see Figs. 1 and 2).
CAUTION:
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities. (See
Fig. 2)
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to a receptacle.
When the power cord is connected, the charger's
pilot lamp will blink in red. (At 1-second intervals).
2. Insert the battery into the charger.
Insert the battery firmly, until it contacts the bottom
of the charger compartment.
CAUTION:
If the battery is inserted in the reverse direction,
not only recharging will become impossible, but it
may also cause problems in the charger such as
deformed recharging terminal.
3. Charging
When inserting a battery in the charger, charging
will commence and the pilot lamp will light
continuously in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red. (At 1-second intervals.) (See
Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown
in Table 1, according to the condition of the charger
or the rechargeable battery.
English
14