D - Configuration; Access To Camera Configuration; Access To All The Settings; Live Video - THOMSON 512391 Handbuch

d - CONFigurATiON

1 - ACCESS TO CAMERA CONFIGURATION

• Insert the installation CD provided into a reader
and run the IP Camera Search Tool program:
This will detect your camera on the network and
show its IP address.
• Double-click on its name to open the camera
configuration in your web browser.
• Your browser will need an additional module to
display the image from your camera correctly
and will ask you if you want to install it. Accept
the request to allow your browser to display the
image:
Note: Depending on which browser you are using,
the procedure may differ but the principle remains
the same: you must permanently allow the module
to run if you want your camera to work properly in
your browser.
• Select the display language, then enter the
username and password for connecting to
your camera. The default username is admin
and the password is left blank, so you should
leave the field empty. At the first connection,
the camera will immediately ask you to replace
the default username and password to improve
security:
8
en
720p WiFi Fixed ip Hd camera
When you have finished changing the username and
password, you will be asked to log back in.

2 - ACCESS TO ALL THE SETTINGS

2.1 - live video

Once you have logged in with your new username
and password, the camera feed will be displayed:
5 2 3 4 6 7
8 9
1 Access to camera configuration tab
2 Anti-flicker: If the image lighting
is artificial, select 50Hz. If the light source
is natural, select 'extérieur [outdoor]'.
3 Quick quality and frame rate selection
4 Horizontal image inversion
5 Vertical image inversion
6 Manual activation of night vision
7 Brightness, contrast and colour settings
8 Not used on this model
9 Not used on this model
10 Take a snapshot of the camera image
on your computer
1
10 11 12