IKEA GÖRLIG Handbuch Seite 13

ENGLISH
3
Close the oven door
halfway to the first
opening position.
Then pull forward
and remove the
door from its seat.
5
Release the locking
system to remove
the internal glass
panel.
7
2
1
First lift carefully
and then remove
the glass panel.
Clean the glass panel with water and soap.
Dry the glass panel carefully.
4
Put the door on a
soft cloth on a
stable surface.
6
90°
Turn the two
fasteners by 90°
and remove them
from their seats.
When the cleaning is completed, install the
glass panel and the oven door. Do the
above steps in the opposite sequence.
The screen-printing zone must face the
inner side of the door. Make sure that after
the installation the surface of the glass
panel frame on the screen-printing zones is
not rough when you touch it.
Make sure that you install the internal glass
panel in the seats correctly.
Replacing the lamp
Put a cloth on the bottom of the interior of
the appliance. It prevents damage to the
lamp glass cover and the cavity.
13