Category Menu items
FADER*
7
Fader
BALANCE
Balance
LOUD
Loudness
AUX ADJUST
Auxiliary input
level adjustment
BEEP
Keypress tone
TEL MUTING
Telephone
muting
AMP GAIN *
8
Amplifier gain
control
AM *
9
AM station
AUX IN *
10
Auxiliary input
*
7
If you are using a two-speaker system, set the fader level to "00."
*
The volume level automatically changes to "VOLUME 30" if you change to "LOW POWER" with the volume level
8
set higher than "VOLUME 30."
*
9
Displayed only when any source other than "AM" is selected.
*
10
Displayed only when any source other than "AUX IN" is selected.
Selectable settings, [reference page]
R06 – F06
: Adjust the front and rear speaker output balance.
[Initial: 00]
L06 – R06
: Adjust the left and right speaker output balance.
[Initial: 00]
• LOUD OFF
: Cancels.
• LOUD ON
: Boost low and high frequencies to produce a well-balanced
sound at a low volume level.
AUX ADJ 00
: Adjust the auxiliary input level to avoid the sudden increase
— AUX ADJ 05
of the output level when changing the source to external
component connected to the AUX input jack on the control
panel.
• BEEP OFF
: Deactivates the keypress tone.
• BEEP ON
: Activates the keypress tone.
• MUTING 1/
: Select either one which mutes the sounds while using a
MUTING 2
cellular phone.
• MUTING OFF
: Cancels.
• LOW POWER
: VOLUME 00 – VOLUME 30 (Select if the maximum power
of each speaker is less than 50 W to prevent damaging the
speaker.)
• HIGH POWER
: VOLUME 00 – VOLUME 50
• AM OFF
: Disable "AM" in source selection.
• AM ON
: Enable "AM" in source selection, [4].
• AUX OFF
: Disable "AUX IN" in source selection.
• AUX ON
: Enable "AUX IN" in source selection, [4].
SETTINGS
15