Atag HL60..A Bedienungsanleitung Seite 24

maintenance
cleaning
daily cleaning
Clean the glass top after each use. You can use a mild
cleaning agent for this - for example, washing-up liquid.
stubborn stains
water marks; lime Stubborn stains can also be removed with a mild cleaning
stains; traces of agent – for example, washing-up liquid.
metal. Remove water marks and lime stains with vinegar.
Traces of metals (due to sliding pans) can be difficult to
remove.
Remove traces of metals with a proprietary cleaning agent.
Remains of food that has boiled over are best removed with
a glass scraper. Melted plastic and sugar can also be
removed with a glass scraper.
never use
You should never use scouring agents. These cause
scratches in which lime deposits and dirt can accumulate.
Never use sharp objects such as steel wool and scourers.
GB 8
If the appliance does not work properly, this does not always mean that it is defective.
Try to deal with the problem yourself first. Phone the service department if the advice
given below does not help.
fault cause
Cooking zones do not get Plug is not in socket.
hot.
Fuse(s) in the meter
cupboard defective.
Metal-like marks on the Incorrect cleaning material
ceramic hob. used.
Scratches on the ceramic Sliding pans across the hob
hob. is the usual cause.
faults
what should I do if...
solution
Put the plug into the
socket.
Check the meter cupboard.
Remove with a cleaning
material like Stahlfix.
Do not slide pans across
the ceramic hob. Any
scratches that have been
made by sliding pans
around cannot be removed.
GB 9