Replacing An Ink Cartridge - Epson XP-800 series Grundlagenhandbuch

Basic Guide
❏ For maximum ink efficiency, only remove an ink
cartridge when you are ready to replace it. Ink
cartridges with low ink status may not be used when
reinserted.
❏ Do not open the ink cartridge package until you are
ready to install it in the product. The cartridge is
vacuum packed to maintain its reliability. If you
leave a cartridge unpacked for a long time before
using it, normal printing may not be possible.
❏ Install all ink cartridges; otherwise, you cannot
print.

Replacing an ink cartridge

Note:
Make sure that the CD/DVD tray is not inserted in the
product and that the P light is on, but not flashing.
A
For best results, gently shake only the new Black
ink cartridge four or five times before opening
the package.
Note:
❏ You do not need to shake the color ink cartridges and
the Photo Black ink cartridge.
❏ Do not shake cartridges after opening the package,
as they may leak.
Replacing Ink Cartridges
B
Remove the ink cartridge from its package and
then remove the cap from the bottom of the
cartridge.
Note:
Do not touch the sections shown in the illustration. Doing
so may prevent normal operation and printing.
C
Open the scanner unit. The ink cartridge holder
moves to the ink cartridge replacement position.
c
Important:
Do not touch the flat white cable connected to the
ink cartridge holder.
19