Registering Magic Remote; How To Use Magic Remote - LG 40UF77 Serie Benutzerhandbuch

GUIDE
TEXT T.OPT
C
Wheel (OK) Press the center of the Wheel button to select a
menu. You can change programmes by using the Wheel button.
(up/down/left/right) Press the up, down, left or
right button to scroll the menu. If you press
while the pointer is in use, the pointer will disappear from the screen
and Magic Remote will operate like a general remote control. To
display the pointer on the screen again, shake Magic Remote to the
left and right.
Shows programme guide.
(Screen Remote) Displays the Screen Remote.
* Accesses the Universal Control Menu. (Depending on model)
D
Used for viewing 3D video. (Only 3D models)
(Voice recognition) (Depending on model)
Network connection is required to use the voice recognition function.
1 Press the voice recognition button.
2 Speak when the voice display window appears on the TV screen.
Use the Magic Remote no further than 10 cm from your face.
The voice recognition may fail when you speak too fast or too
slowly.
The recognition rate may vary depending on the user's
characteristics (voice, pronunciation, intonation, and speed) and
the environment (noise and TV volume).
(Q. Settings) Accesses the Quick Settings.
* Pressing and holding the
menu.
Coloured buttons These access special functions in some menus.
( : Red, : Green, : Yellow,
Teletext buttons ( ,
teletext.
Recalls your preferred subtitle in digital mode.
16
EXIT
C
D
SUBT.
buttons
button displays the Advanced
: Blue)
) These buttons are used for

Registering magic remote

How to register the magic remote
To use the Magic Remote, rst pair it with your TV.
1 Put batteries into the Magic Remote and turn the TV on.
2 Point the Magic Remote at your TV and press the
the remote control.
* If the TV fails to register the Magic Remote, try again after turning the
TV o and back on.
How to deregister the magic remote
Press the (BACK) and (HOME) buttons at the same time, for
ve seconds, to unpair the Magic Remote with your TV.
* Pressing and holding the button will let you cancel and re-reg-
ister Magic Remote at once.

How to use magic remote

Shake the Magic Remote slightly to the right and left or press
(HOME), (INPUT), buttons to make the pointer
appear on the screen.
(In some TV models, the pointer will appear when you turn the
Wheel (OK) button.)
If the pointer has not been used for a certain period of time or
Magic Remote is placed on a at surface, then the pointer will
disappear.
If the pointer is not responding smoothly, you can reset the
pointer by moving it to the edge of the screen.
The Magic Remote depletes batteries faster than a normal remote
due to the additional features.
Wheel (OK) on