Remaining Risk Factors - Holzmann SB 162VN Betriebsanleitung

 Before starting the machine remove any adjusting wrenches and screwdrivers
 Use a clip or clamping jaws to secure the workpiece
 Do not fix the workpiece with your hands
 Rotating parts can cause severe cut injuries
 Keep the drills sharp and clean, so they get stuck less often and are easier to guide
 Keep any machine that is not being used out of reach of children
 Do not stare into beam. Do not point laser light at other persons.
 Do not view directly into beam with optical instruments (binocular, telescope).
 Do not point laser at reflective surfaces.
 Avoid exposure to laser radiation. Laser may emit hazardous radiation.
 Do not replace the installed laser with a different type.
 Any repairs must only be carried out by the authorized service agent.

12.3 Remaining risk factors

It is important to ensure that each machine has remaining risks.
In the execution of all work (even the simplest) greatest attention is
required. A safe working depends on you!
Even if the machine is used as required it is still impossible to eliminate certain residual risk
factors totally. The following hazards may arise in connection with the machine´s construction
and design:
 Risk of injury to the hands / fingers by the rotating tool during operation.
 Risk of injury due to sharp edges of the workpiece, especially in non-fixed with a suitable tool /
device workpiece.
 Risk of injury: hair and loose clothing, etc. can be captured and wound up! Safety regulations
must be observed with regard to clothing.
 Risk of injury due to contacting with live electrical components.
 Risk of injury due to dust emissions, treated with harmful agents workpieces
 Risk of injury to the eye by flying debris, even with safety goggles.
 Risk of injury to the hearing by prolonged working without hearing protection.
These risk factors can be minimized through obeying all security and operation instructions,
proper machine maintenance, proficient and appropriate operation by persons with technical
knowledge and experience.
In spite of all safety is and remains her healthy common sense and their corresponding technical
qualification / training for use of the machines most important safety factor!
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
W A R N I N G
SAFETY
23
SB162VN