Troubleshooting
If the device is not working properly, please check whether you are able to rectify the
problem yourself fi rst. Otherwise contact customer service.
Do not attempt to repair a defective device yourself!
Problem
The device is not
working.
The device
automatically
deactivates.
Technical data
Model:
Article No.:
Power supply:
Power:
Protection class:
Max. fi lling quantity:
Capacity:
Disposal
The packaging material is reusable. Dispose of the packaging material in an
environmentally compatible manner and bring it to a materials collection point.
Dispose of the appliance in an environmentally compatible manner. Dispose
of it in a recycling facility for electrical and electronic waste appliances. More
detailed information can be obtained from your local municipality.
Customer service / importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany
Tel.: +49 38851 314650 *)
*) Calls subject to a charge.
All rights reserved.
Possible cause/solution
•
Is the mains plug properly connected with the socket?
•
Is the socket defective? Try another socket.
•
Check the fuse for your mains connection.
•
Is the device activated?
•
The device is overloaded. The device is equipped with
overload protection that deactivates the device when
it overloads. If this occurs, immediately disconnect
the plug from the socket and let the device cool off for
approximately 10 minutes. Afterwards, the device is ready
for use again.
XJ-13406
Z 05291
220-240 V ~ 50/60 Hz
250 W
II
1,5l
3l
19