Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 19
When the duration
has elapsed
duration
Cancelling
prematurely
Timer button lock
-
When the duration has elapsed, the burner switches
off, a signal sounds for 30 seconds,
the right of the display and on the left
rotate.
Touch any symbol. The display goes out and the
audible signal ceases.
TURN THE CONTROL KNOB TO THE "0" POSITION
FOR THE BURNERS WHICH HAVE BEEN
SWITCHED OFF BY THE TIMER.
Touch the symbol
the time using the symbol - or + whithin next 5 seconds.
The new time begins to count down after a few seconds.
Touch the symbol
the time to
disappears after a few seconds or if another timer is
set, the timer with the shortest time is displayed.
The timer function is no longer active after a power cut.
You can set duration up to 99 minutes.
If you would like to call up the remaining duration of the
set times, touching the symbol
Press and hold the
A whistle will sound and the display will show the
following message
programme information again. If any symbol is touched
when this function is being used, a whistle will sound
and
+
To deactivate the button lock, press the
again for at least 4 seconds.
W
W
, select the burner and change
00
using the symbol - or +. The indicator
0
˜–
will appear on the display.
˜–
00
, select the burner and change
W
you will see them.
symbol for at least 4 seconds.
Then the display will show the
.
is shown on
the dots will
symbol
0
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis