SEVERIN MW7877 Gebrauchsanweisung Seite 23

6. Turn the rotary control
7. Press the rotary control
Note: The cooking time can only be set once the selected temperature has been reached, and the food has been placed inside the
oven compartment.
Note: Steps 2-3 can be omitted, if pre-heating is not required.
Microwave/hot-air combination programmes
For this combination, four programme settings are available.
Hot-air temperature: 110°C
140°C
170°C
200°C
The cooking time can be pre-set to a maximum of 95 minutes.
Example: to programme the unit for a cooking time of 28 minutes at a temperature of 170°C.
1. Press repeatedly until the display shows 170°C.
2. Turn the rotary control
3. Press the rotary control
Setting multiple programmes
Prior to operation, the microwave can be set for up to 3 programmes to run consecutively, e.g. defrosting fi rst, followed by the
microwave and then the hot-air function. The multiple-programme feature can be used with any of the microwave, grill and hot-air
functions.
Example: using the defrost function fi rst, followed by the microwave and then the hot-air function.
1. Use the button to select a reduced microwave setting for defrosting.
2. Turn the rotary control
3. Use the button to select a high microwave setting.
4. Turn the rotary control
5. Use the button to select the required hot-air temperature.
6. Turn the rotary control
7. Press the rotary control
Note: The automatic cooking programmes and the quick-programme are not suitable for multiple programming.
If multiple programmes are set, the indicator
Hint: This memory function is especially helpful when using the microwave to cook food at different power settings. While a higher
power setting is selected initially, the power can be reduced at a later stage in order to keep the food hot, and to ensure that
the heat is evenly distributed when the food is already done.
Defrost programme:
This programme is useful for defrosting food by setting the defrosting time.
The defrosting time can be pre-set to a maximum of 45 minutes.
Example: to programme the unit for a defrosting time of 5 minutes.
1. Turn the rotary control
2. Press to confi rm the programme selection.
3. Turn the rotary control
4. Press the rotary control
Helpful notes:
∙ Four beep signals indicate that 2/3 of the programmed defrosting time has elapsed. Turn the food over, taking out any that is
already defrosted. Press the rotary control
∙ Should the food not be completely defrosted after the pre-set defrosting time has elapsed, it is advisable to limit any further
defrosting times to 1-minute periods until the food is fully defrosted.
until the display shows 20:00.
to start the cooking process.
:
until the display shows 28:00.
to start the cooking process.
to select the required defrosting time.
to select the required microwave cooking time.
to select the required hot-air cooking time
to start the multiple programme selection.
is shown in the display.
anti-clockwise until the display shows 9.
until the display shows 5:00.
to start the defrost programme.
to continue the programme.
23