Pc Connection; Earphone Connection; Scart Connection; Media Connection - Seg Yokohama Bedienungsanleitung

CONNECTIONS & SETUP

PC CONNECTION

When connecting with a D-sub 15 pin cable
1. Connect the VGA output of the PC to the PC VGA Input jack on the set.
2. Connect the audio outputs of the PC to the PC Audio Input jack on the set.
3. Turn on the PC and the set.
4. Select PC source with using the INPUT button on the remote control.
5. Refer to the PC manual for operating instructions.
PC INPUT Supported format:
Support Resolution:800*600@60HZ, 1024*768@60HZ,
1152*864@60HZ, 1280*720@60HZ, 1280*768@60HZ,
1280*960@60HZ, 1280*1024@60HZ, 1920*1080@60HZ.
Note:
1. Recommended resolution is 1920* 1080@60HZ.
2. Others resolution may not be supported.
3. The product is not suitable for use at visual
display workplace accordance to section 2
of the German Ordinance for work with Visual
Display Units.

EARPHONE CONNECTION

When connecting with a EARPHONE cable
1. Connect the EARPHONE output of the TV to the
EARPHONE input jack.
2. Turn on the TV, the earphone is activated but the TV
Speakers are no sound output.
18
CONNECTIONS & SETUP

SCART CONNECTION

When connecting with a SCART cable
1. Connect the SCART output of the DVD to the SCART input on the set.
2. Turn on the DVD player, insert a DVD.
3. Select SCART source with using the INPUT button on the remote control.
4. Refer to the DVD player's manual for operating instructions.

MEDIA CONNECTION

When connecting with a USB
1. Connect the USB Device to the USB slot on
the TV.
2. Select Media source with using the INPUT
button on the Remote control.
3. Select Media Mode: Photo, Music, Movie, Text
to play.
4. The USB should be format with
FAT32 system.
Note: This unit has been designed where possible to be
compatible with most makes of USB device.
Due to the many varied types available, we cannot
guarantee that all makes and models are to be used.
19