Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rear panel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
DMX-control-channels:
DMX-512-connection:
Sound-control:
Flash-rate:
Number of colours:
Number of gobos:
Outside diameter of the gobos:
Image diameter of the gobos:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T a :
Maximum housing temperature T B (steady state):
Min.distance from flammable surfaces:
Min.distance to lighted object:
Fuse:
Accessory:
GE CSR 1200S DE 100V/1200W 750h short arc
OSRAM SharXS HTI 1200W/D7/60 750h
PHILIPS MSR 1200SA/DE GOLD SFC 10-4 750h
FUTURELIGHT Easy-2 remote control
FUTURELIGHT EX-8/32 controller
FUTURELIGHT CP-240 controller
FUTURELIGHT CP-256/64 controller 16bit
FUTURELIGHT CP-512/64 controller 16bit
Wizard-512 USB DMX-Software + Interface
Wizard-1024 USB DMX-Software + Interface
FUTURELIGHT DES-3 DMX-terminator 3-pin
Please note: Every information is subject to change without prior notice. 02.07.2007 ©
230 V AC, 50 Hz ~
1680 W
8
3-pin XLR
via built-in microphone
10 Hz
7 dichroic + white
7 rotating gobos and open
35 mm
27 mm
860 x 345 x 310 mm
32 kg
45° C
145° C
0.5 m
0.5 m
F 15 A, 250 V
No. 89302000
No. 89302012
No. 89313015
No. 51834011
No. 51834047
No. 51834265
No. 51834288
No. 51834295
No. 51860102
No. 51860110
No. 51834001
32/60
00028047.DOC, Version 1.1