Stopping The Replay; Viewing Pictures - Clatronic dvd 755 hc Bedienungsanleitung

Stopping the replay

Viewing pictures

05-DVD 755 HC - GB 63
3. Use the Cursor buttons (Fig. 3/9) to select the desired directory of fi le in
the left-hand list.
4. Select this by pressing the ENTER button (Fig. 3/27).
File: Once you have selected a fi le, this is now displayed directly or played
back.
Directory: If you have called up a directory, a list of fi les now opens.
Here too you can select the desired fi le with the Cursor buttons and the
ENTER button (Fig. 3/27). If you have selected a fi le, this is now displayed or
played back.
Please note:
There are both lots of burning and compressing methods as well as high
quality differences in CDs/DVDs and burned CDs/DVDs.
For this reason there may occasionally be problems when fi les are played
back (for example fi les are displayed but cannot be played back). This is no
malfunction of the player.
NOTE:
With the „ " button (Fig. 3/9) you can return from the fi les to the directories.
Press the „ "-button (Fig. 3/35) on the remote control to stop the replay.
The DVD player is suitable for viewing digital photographs. These photos
may be stored only any medium (DVD, CD, etc.) supported by the DVD
player.
NOTE:
g Please ensure a suitable size of the photos. Large size photos may take
some time to be displayed or may not be displayed at all. It is of advantage
if the size of the photo corresponds with the screen size of the playback
device. For TVs this is normally 1024x576 pixel (TV-aspect 16:9) or 768x576
(TV-aspect 4:3).
Please note: generally any conversion (transformation) entails always
g
an information loss in reference to the original format.
Start the replay of photos by selecting the fi le from which the replay shall start
➯ Page 62, „Selecting fi le/directory and starting replay".
NOTE:
After a few seconds a preview picture appears on the right-hand side in the
two-column menu window.
Scrolling
Manual: Press the I (Fig. 3/25) or
remote control to scroll forward or back.
Automatic: Press the ENTER button (Fig. 3/27). The pictures change
automatically.
Working in fi le mode
I -button (Fig. 3/23) on the
63
05.04.2007, 12:37:51 Uhr