Switching On The Appliance; Setting The Temperature - Siemens KA..N Serie Gebrauchsanleitung

8
Temperature display refrigerator compartment
The numbers correspond to the set refrigerator
compartment temperatures in °C.
9
"super" display (refrigerator compartment)
Illuminates when "super cooling" is on.
10
"Alarm off" button
This button is used to switch off the warning
signal, (see chapter "Alarm function").
11
Button Vacation
Is used to switch vacation mode on and off, (see
chapter Special functions, section Vacation
mode).
12
Button "lock" function
If this function is switched on, no settings are
possible via the controls.

Switching on the appliance

When connected, the appliance is switched on. A
warning signal sounds.
Press the "alarm off" button. The warning signal
switches off.
Display "alarm off" goes out when the appliance has
reached the set temperature.
The preset temperatures are reached after several
hours. Do not put any food in the appliance
beforehand.
The factory has recommended the following
temperatures:
Freezer compartment: -18 °C
■
Refrigerator compartment: +4 °C
■

Setting the temperature

Freezer compartment
The temperature can be set from -16 °C to -24 °C.
1. Using the selection button freezer compartment 1
to select freezer compartment.
2. Use the temperature setting button 4 to set
the required freezer compartment temperature.
The value last selected is saved. The set temperature is
indicated on display 2.
We recommend a setting of -18 °C.
Refrigerator compartment
The temperature can be set from 2 °C to 8 °C.
1. Use the selection button refrigerator compartment 7
to select refrigerator compartment.
2. Using the temperature setting button 4, to set
the required refrigerator compartment temperature.
The value last selected is saved. The set temperature is
indicated on temperature display 8.
We recommend a setting of +4 °C.
Perishable food should not be stored above +4 °C.
en
31