Dab Tuner Operations; Tuning In To An Ensemble And One Of The Services - JVC KD-SH9101 Bedienungsanleitung

DAB TUNER OPERATIONS

We recommend that you use DAB (Digital Audio
Broadcasting) tuner KT-DB1500 or KT-DB1000
with your unit.
If you have another DAB tuner, consult your JVC
IN-CAR ENTERTAINMENT dealer.
• Refer also to the Instructions supplied with
your DAB tuner.
What is DAB system?
DAB is one of the digital radio broadcasting
systems available today. It can deliver CD
quality sound without any annoying
interference and signal distortion.
Furthermore, it can carry text, pictures, and
data.
In contrast to FM broadcast, where each
programme is transmitted on its own
frequency, DAB combines several
programmes (called "services") to form one
"ensemble."
In addition, each "service"—called "primary
service"—can also be divided into its
components (called "secondary service").
With the DAB tuner connected with this unit,
you can enjoy these DAB services.
62
D
SRC
DISP
ATT
SEL 1 2 3 4 5
Tuning in to an ensemble and
one of the services
A typical ensemble has 6 or more programmes
(services) broadcast at the same time. After
tuning in to an ensemble, you can select a
service you want to listen to.
1
Select the DAB tuner.
SRC
Last received ensemble (service) of the
selected band is tuned in.
2
Select the DAB band (DAB1, DAB2,
or DAB3).
SRC
DAB1
DAB3
DAB2
Note:
This receiver has three DAB bands (DAB1,
DAB2, DAB3). You can use any of them to tune
in to an ensemble.
T/P
MODE
6 M
Each time you press the button,
the source changes as described
on page 7. When you select a
source, the power automatically
comes on.
Channel number
Ensemble label
1 Press and hold SRC for more
than 1 second.
The band indication on the
display starts flashing.
2 Within about 5 seconds (wile
the band indication is
flashing), press SRC again.
Each time you press the
button, the band changes.