First Ring; Changing The Battery - Sagem D18T Bedienungsanleitung

D16T/D18T/D21T
9.9.

First ring

Activating this function is only useful if you do your line does not have the CLIP service.
This menu allows you to arrange for your telephone to ring when a call is received even if it is
connected on the same line with another device (a fax, a cord telephone, etc.).
This function is activated as default. It will be automatically deactivated when a CLIP call is
received (the number of which will be displayed on the handset screen).
1. Press
2. Using the
- select "ON" using the
- select "deactivate" using the
3. Press
10. Call log
10.1.
Received call log
If you have subscribed to a "Caller display" service, The received call log presents the calls you
received. (max. 5 last calls). To consult the list:
1. Press briefly
2. The most recent name or call number is displayed according to whether your contact's
number is included in your phonebook or not.
- If it is a private number, the screen displays "Hide id".
- If you are not in same area as your contact, the screen displays "unavailable".
3. Press
10.2.
Diallled call log
The dialled call log presents the calls you made (max. 5 last calls).
To consult the list:
1. Press briefly
2. The last dialled number is displayed.
3. to recall this number, press

11. Changing the battery

Make sure the telephone is OFF before you replace battery.
1. Remove the battery compartment door.
2. Disconnect the cord attached to the battery pack and remove the battery pack from the
handset.
3. Insert the new battery pack and connect the cord into the jack inside the handset.
4. Put the battery compartment door back on.
5. Place handset in the base to charge. Allow the handset battery to properly charge (for
15 hours) prior to first use or when you install a new battery pack. If you do not properly
charge the phone, battery performance will be compromised.
Danger of explosion if battery is incorrectly replaced. Replace only with 2,4V 550mAh
type or equivalent rechargeable battery pack. Do not dispose of the battery in a fire. The
cell may explode. Check with local code for possible special disposal instructions.
. Select "advanced set" using the
or key, select "first ring". Press
or key, to activate the first ring.
key to confirm your selection. You will hear a confirmation tone.
key.
to display the date and the time of the call.
.
key.
or key, press
.
or key or to deactivate the first ring.
- 17 -
.