How To Operate The Appliance; Thermostat Setting - BORETTI BR-123 Bedienungsanleitung

PART 2 HOW TO OPERATE THE APPLIANCE

Thermostat Setting

• Thermostat automatically regulates the inside temperature of the refrigerator compartment and freezer compartment. By
rotating the knob from position 1 to 5, colder temperatures can be obtained.
• The " 0 " position shows thermostat is closed and no cooling is available.
• For short-term storage of food in the freezer compartment, you can set the knob between minimum and medium position (1-3).
• For long-term storage of food in the freezer compartment, you can set knob medium position.(3-4)
• Note that; the ambient temperature, temperature of the freshly stored food and how often the door is opened, affects
the temperature in the refrigerator and freezer compartments. If required, change the temperature setting.
• When you first switch on the appliance, you should ideally try to run it without any food in for 24 hours and not open the door. If
you need to use it straight away, try not to put much food inside.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting in order not to damage the
compressor.
• REFRIGERATORS (with 4 star rating): The freezer of the refrigerator cools down to -18°C and less.
• LARDERS (without star rating): Larders (coolers) have not any freezer compartment but can cool down to 4-6° C.