3.
Operating Instructions
3.1
Appliance overview
3
5
Fig. 2: Appliance overview
No.
Designation
1
Handle
2
Air outlet
3
Temperature control (thermostat)
4
Heating level switch
5
Pilot lamp
Tab. 2: Appliance description
3.2
Start-up and operation
The appliance can be put into operation after removing the packaging. Proceed as follows
for this:
1. Make sure that the heating level switch (see Fig. 2, No. 4) is at "0". Then connect the fan
heater to an earthed socket protected with an earth-leakage circuit breaker.
2. Now switch on the appliance by moving the heating level switch (see Fig. 2, No. 4) to
the desired position. The following applies here:
31/40
1
GB
2
4