2.
Preparing the Product for Operation
2.1
Unpacking the scope of supply
Check whether the scope of supply is complete and free of defects immediately after ope-
ning the packaging. Contact the seller immediately if the scope of supply is incomplete or
defective. Do not put the appliance into operation if it is defective.
2.2
Keeping the original packaging
Keep the original packaging in a safe place over the entire service life of the product. Use
GB
the packaging for storing and transporting the appliance. Only dispose of the packaging
after the product service life has come to an end. You can find information on the proper
disposal in Chapter 8.
2.3
Setting up the appliance
The feet (supplied separately in the carton) must be fitted onto the appliance before use.
1. Place the appliance upside down for this.
2. Fasten the standing feet at the intended locations using the screw.
3. Now put the radiator back on its feet.
3.
Operating Instructions
3.1
Overview
3.1.1 Appliance overview
Protective mesh
30/40
Display
Main switch
(not shown)
Supporting feet