Operation; Cleaning And Care; Descaling - Unold 18566 Bedienungsanleitung

oPeration

1. Remove the kettle from the base.
2. Open the lid.
3. Fill the kettle with at least 0.5 liters of
water. Do not fill the kettle with more than
1.0 liters of water ("Max" marking).
4. Close the lid by pressing lightly.
5. Place the kettle level on the base.
6. Switch on the kettle by pressing the ON/
OFF switch downwards into the „I"-position.
The kettle cannot be switched on if it is not
properly seated on the base.
7. When the water boils, the appliance
automatically shuts off.
8. If the kettle is lifted up before the water
boils, it has to be switched off by pressing
the I/O switch. If the appliance is not

cleaning anD care

1. allow the appliance to cool before cleaning it.
2. Before cleaning, always turn off the appliance
and unplug it from the power supply.
3. Do not immerse the base, power cord or
kettle in water or other liquids or wash them
in the dishwasher.
4. Wipe off the base and the kettle with a damp
cloth and a little dishwashing detergent. Do
not use any abrasive scouring agents, steel

DeScaling

1. The lime scale filter has to be cleaned regu-
larly. Please empty the kettle completely
and allow it to cool off. Carefully remove the
filter from the pour spout. Clean the filter
carefully with a soft brush under running
water. You can also place the filter in a bowl
with a descaling solution. Then rinse the
filter with clear water and insert it in the
pour spout.
2. To keep the appliance operating efficiently
and to prolong its service life, it should
be descaled regularly, depending on the
hardness of your water.
switched off and then placed back on the
base, the boiling will be continued.
9. If you want to boil more water, please allow
the appliance to cool off for a few minutes.
10. Boiling water can cause scalding. Therefore,
please handle the appliance with care when it
contains hot water.
11. The appliance features boil dry protection.
When operated without water or with
excessive scaling, the appliance shuts off
automatically. If this happens, please allow
the appliance to cool off briefly before filling
it with water again or descale the appliance
as described in the chapter "Descaling" on
page 11.
wool, metal objects, hot cleaning agents or
disinfectants, since they can damage the
appliance.
5. The appliance must be completely dry on
the outside before you use it again.
3. To descale the kettle, fill it no more than
half full with a solution of half water and
half household vinegar. Bring the liquid to
a boil and leave it in the kettle for a while.
4. Pour the descaling solution out of the
kettle.
5. Then fill it with fresh water and bring to a
boil. Pour this water out as well. Then rinse
the kettle at least twice with clear water.
6. Of course, you can also use commercially
available descaling products; please follow
the instructions on the package.
11