Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Care; Descaling - Unold 18755 Bedienungsanleitung

Blitzkocher kessel
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
12. Please allow the product to cool down for a certain time before using the
kettle again to heat water.
13. The kettle is fitted with a dry-operation cutout that switches off the heating
elements when they become too hot, for instance when the kettle has boiled
dry. Allow the kettle to cool down. Then fill the kettle with cold water. This
will reset the cutout so that the kettle can be used again.
14. Always use fresh and cold water. Do not leave water in the kettle.
15. Switch off and unplug electrical appliances after use.
Boiling water can cause scalding. Therefore, please handle the appliance
with care when it contains hot water.
The appliance becomes very hot during operation and maintains the heat
during some time after disconnection.

CLEANING AND CARE

1.
Do not immerse the base, power cord or kettle in water or other liquids or
wash them in the dishwasher.
2.
Wipe off the base and the kettle with a damp cloth and a little dishwash-
ing detergent. Do not use any abrasive scouring agents, steel wool, metal
objects, hot cleaning agents or disinfectants, since they can damage the
appliance.
3.
The appliance must be completely dry on the outside before you use it
again.

DESCALING

1.
To keep the appliance operating efficiently and to prolong its service life,
it should be descaled regularly, depending on the hardness of your water.
3.
Use off-the-shelf descaling products for electronic kettles and comply with
the manufacturer's instructions. To descale, fill the kettle half full, maxi-
mum, otherwise the liquid can boil over and can cause severe injuries.
Before cleaning, always turn off the appliance and unplug it from
the power supply.
Allow the appliance to cool before cleaning it.
2. The lime scale filter has to be cleaned regu-
larly. Please empty the kettle completely and allow
it to cool off. Carefully remove the filter from the
pour spout. Clean the filter carefully with a soft
brush under running water. You can also place the
filter in a bowl with a descaling solution. Then rinse
the filter with clear water and insert it in the pour
spout.
Copyright UNOLD AG | www.unold.de
17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis