Working With The Implement - FLORABEST FLV 1200 B1 Originalbetriebsanleitung

WARNING! The cylinder continues
to run for a brief period
after the implement has
been switched off. Do not tilt
or carry the implement while
the motor is still running and
do not touch the cylinder
while it is still rotating. Danger
of injury!

Working with the implement

To maintain a well cared-for lawn, it
should be aerated every 4 to 6 weeks.
Verticuting is a more intensive
intervention than aerating and should
only be carried out once or twice a year.
The best time is in spring after the lawn
has been mown for the first time. If
necessary, repeat this in late summer.
When working on slopes
always proceed across the
slope. Be particularly careful
when walking backwards
and pulling the implement.
Danger of stumbling!
After work and to transport the
implement disconnect the power plug
and wait until the cylinder is standing
still.
The shorter the grass, the better the
lawn can be treated. Furthermore,
the implement is less stressed and
the service life of the cylinder is
prolonged.
• The implement can be operated with or
without the collection bag.
Recommendation: Work with the
collection
bag for aerating and without the
collection bag for verticuting.
• Mow the lawn to the required grass
height.
• Do not use the scarifier in lomg
grass may otherwise wind around the
scariequipment.
• Select the appropriate working or
readjustment position (in the event of
cylinder wear) so that the implement
is not overloaded.
• Commence work in the vicinity of the
power socket and proceed away from
the socket.
• Always ensure that the extension cable
is behind you, and after turning move
it to the side that has already been
treated.
• Guide the implement at a walking
pace down lanes that are as straight
as possible. To ensure uninterrupted
aerating or verticuting the individual
lanes should always overlap by a few
centimetres. Dwelling too long at the
same place while the implement is
running can damage the grass sward.
• To ensure that the extension cable is not
an impediment, turn the implement in
such a manner that the cable strain
relief on the bar always faces the side
that has been treated.
• Adjust the transport position 0 setting
(see "Setting the Working Position")
when transporting the implement.
• Lift the implement to transport it over
steps and sensitive surfaces (e.g.
tiles).
• Always clean the implement after each
use (see "Cleaning/Maintenance").
• After having treated lawns with dense
moss growth, it is advisable to reseed
the lawn so that it can regenerate
itself quicker.
GB IE
41