Field Of Application; Coating Materials Suitable For Use; Coating Materials Not Suitable For Use; The Following Materials Can Only Be Processed With Optional Accessories - WAGNER W 400 Originalbetriebsanleitung

W 400
13) Ventilating hose
15) Feed hopper (2 pcs.)

5. Field of application

WallPerfect W 400 has been specially developed for the application of interior wall paints.
Special spray attachments are required to process low-viscosity materials such as paints,
glazes etc.. These can be found under "Accessories".

6. Coating Materials Suitable for Use

Interior wall paint (dispersions and latex paint)

7. Coating Materials Not Suitable for Use

Materials that contain highly abrasive components, facade paint, caustic solutions and
acidic coating substances. Flammable materials.
8. The following materials can only be processed with
optional accessories:
Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes,
automotive finishes, staining sealers and wood sealer-preservatives.

9. Preparation of the workplace

Sockets and plugs must be masked. Risk of an electric shock as a
consequence of sprayed material entering the socket!
Mask all the areas and objects that are not to be spray painted, or
remove them from the work area. No liability is assumed for damage
due to overspray.
Silicate paint corrodes glass and ceramic surfaces upon contact! All
such surfaces must therefore be completely covered.
Pay attention to the quality of the adhesive tape used.
i
Do not use excessively strong adhesive tape on wallpaper and painted
surfaces, in order to avoid damaging these surfaces when removing the
tape. Remove adhesive tape slowly and evenly; do not use jerky movements.
Do not leave adhesive tape on surfaces any longer than necessary, in order
to minimise the possibility of residues when removing.
Also observe the adhesive tape manufacturer's instructions.
Description/ Scope of delivery (Fig. 1)
14) Stirring rod
16) Practice poster
GB
21