Special Safety Directions For The Cordless Grass & Shrub Cutter - FLORABEST FGS 3.6 A1 Originalbetriebsanleitung

GB IE
water. If the liquid gets into
eyes, seek medical assistance.
Leaking battery fluid may cause skin
irritations or burns.
6) SERVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
Special Safety Directions for
the cordless grass & shrub
cutter
1) SPECIAL SAFETY DIRECTIONS
FOR HEDGE TRIMMERS
a) Keep all body parts away from
the blade. Do not attempt to re-
move clippings while the blade
is operating or to hold on to
material which is to be cut. Only
remove trapped clippings when
the tool is switched off. One mo-
ment of carelessness in the usage of
the hedge trimmer can lead to severe
injury.
b) Carry the hedge trimmer at
the handle with an idle blade.
Always pull on the protective
cover during transport and stor-
age of the hedge trimmer.
Careful handling of the tool reduces
the risk of injury from the blade.
c) Hold the power tool only on the
insulated handle surfaces, as
the cutting blade may come into
contact with concealed power
cables. Contact between the cutting
blade and a live cable may render me-
tallic components live and result in an
10
electric shock.
d) Before the work, search the
hedge for concealed objects,
e.g. cable etc. To avoid damaging
the equipment.
e) Hold the hedge trimmer cor-
rectly, e.g. with both hands on
the handles, if there are two
handles. Loss of control of the equip-
ment may result in injuries.
f) Wear suitable clothing and
work clothes when working
with the equipment. Do not hold
the equipment by the cutting
blade or lift it on the cutting
blade. Contact with the cutting blade
can cause injuries.
2) FURTHER SAFETY DIRECTIONS
For your personal safety:
Wear suitable work clothes such
as boots with non-slip soles, sturdy
long trousers, gloves and goggles.
Hearing protection must be used
in case the device is used over
prolonged periods of time. Do
not wear long flowing clothing or
jewellery, as this may be caught by
moving parts. Do not use this tool
while walking barefooted or while
wearing open sandals.
a) Only switch on the tool when
hands, feet and all other body
parts are at a secure distance to
the tool. Risk of injury from cuts.
b) Take care that you do not injure
your hands and feet with the
cutting elements.
c) Remove the power supply unit
before working with the equip-
ment. Do not use extension
cables. The power supply unit