Installation; Removing Packing; Removing Transit Bolts - LG MFL67379113 Bedienungsanleitung

Installation

■

Removing packing

Washer
Base Packing
WARNING
• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
There is a risk of suffocation ! Keep all packaging well away from children.
■

Removing transit bolts

To prevent internal damage during transport, the 4 special bolts are locked.
Before operating the washer, remove the bolts along with the rubber bungs.
If they are not removed, it may cause heavy vibration, noise and malfunction.
Spanner
Transit bolt
1. Remove the cardboard box and
styrofoam packing.
2. Lift the washing machine and remove
the base packing.
3. Remove the tape securing the power
supply cord and drain hose.
4. Remove the inlet hose from the drum.
NOTE
• Keep the spanner provided for
future use.
1. Unscrew the 4 bolts with
the spanner supplied.
2. Take out the 4 bolts along with the
rubber bungs by slightly twisting the
bung.
NOTE
• Keep the transit bolts for future use.
3. Close the holes with the caps supplied.
9