Intended Purpose; General Description; Extent Of The Delivery; Functional Description - Parkside PSBM 500 C4 Originalbetriebsanleitung

Intended purpose

The device is intended:
- for impact drilling in concrete, ma-
sonry or rocks,
- for drilling in wood, metal or plastic,
- for screwing in and loosening screws.
Any other use that is not explicitly ap-
proved in these instructions may result in
damage to the equipment and represent a
serious danger to the user.
For security reasons, the device is not in-
tended for children and young people un-
der the age of 16. Young people aged 16
and over may only use the device under
adult supervision.
The device is not designed for commercial
use.
The manufacturer cannot be held liable for
damage when the appliance is not used
in conformity with its intended purpose or
due to incorrect operation.

General description

The illustrations are on the
front and back foldout pages.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Impact Drill
- Additional handle
- Depth stop
- Storage case
- Instruction Manual
Illustrated tools such as a drill and screw-
drivers are not included in the scope of
delivery.

Functional description

The impact drill bearing has a twin-sleeve
keyless chuck used for simple tool change.
The continuous speed control, the lock but-
ton for continuous operations as well as the
right/left rotation make it possible to work
comfortably.
Refer to the following descriptions for a
functional description of the controls.

Overview

1 Changeover switch drilling/
impact drilling
2 Depth stop
3 Butterfly screw to adjust the ad-
ditional handle and depth stop
4 Keyless chuck
4a Rear sleeve
4b Front sleeve
5 Additional handle
6 Rotational direction switch
7 Speed adjusting ring
8 On/off switch
9 Lock button for continuous opera-
tion (not visible)
10 Handle
11 Power cable
12 Ventilation openings
13 Storage case
GB
5