General Operation; Transmitting Vox / Hands-Free; Call-Ring Tone - DNT WT80 Bedienungsanleitung

General operation

Press Menü / Lock button three times until LCD displays VOX icon
and VOX sensitivity digit display will fl ash.
Press Up-/Down button to select 0F to switch the VOX to off.
Press the PTT button to confi rm or wait about 3 seconds, the changes
will be stored automatically.

Transmitting VOX / HANDS-FREE

Press Power On/Off button to turn off the radio.
Plug the earphone into the earphone jack
Press Power On/Off button to turn on the radio, LCD display VOX
icon.
Set the earphone microphone close to your mouth (1~3 cm) and
speak into the microphone, the radio will transmit automatically.
Stop speaking, the radio will stop transmiting and go into receiving
status.
Adjust the volume to comfortable level if necessary.
You must turn off the unit before plug the earphone
in,otherwise the unit will keep on transmitting.

Call-Ring tone

You can use call tones to get the attention of other people with radios on
the same channel and CTCSS tone. You can also use call tones as the
signal of the start or end of a transmission.
Press CALL button the LCD display TX icon and your call tone will be
transmitted to nearby receivers set at the same channel. The call tones
have 5 kinds of sound for personal selection.
Select call tones
Press Menu button four times, LCD display CA icon and call tone
number will fl ash.
- 28 -