Inhaltsverzeichnis
Werbung
1
2
3
4
5
36
RDS (Radio Data System) (3)
(3)RT mode
< When you select RT with the RDS button, "RT" will blink for
about 4 seconds. After 4 seconds, the data of received RT will
be displayed.
<If there is no RT data among received broadcastings, RDS mode
will be automatically switched to PS mode.
(4)TA mode (TP Search Function)
< When you select TA by use of the RDS button, "TA" will blink for
about 4 seconds. After 4 seconds, TP received broadcasting
will be searched with FM frequency increasing in 50 kHz steps.
< If TP received broadcasting is searched, the increase in
frequency will stop and it is asked whether TA will be received
or not.
< If TP and TA turn off while you are receiving TA, the tuner will
search TA broadcasting again with FM frequency increasing in
50 kHz steps.
PTY Search
How to Search For Your Desired Program Using PTY
Search
1
Press the FM/AM button to select FM.
2
Press the RDS button for longer than 1.5 seconds.
Then "SEARCH" will be shown in the display.
3
Select the desired PTY mode by pressing the h/y buttons or
turning the MULTI JOG knob.
< Select your desired one from among 31 kinds of PTY programs.
The program will blink.
4
Press the MEMORY button.
The program indicator is changed to light steadily.
5
Press the h or y buttons or turn the MULTI JOG knob to the
right or left just a little bit. Searching will start.
< When the PTY mode that you have selected is searched,
searching will stop and the PTY mode will be displayed.
< If the same program type is not found during PTY Search, it will
stop at the beginning frequency.
< If you want to cancel PTY search while searching, press the
RDS button. Searching will stop and search mode will be
released automatically.
ENGLISH
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
