Radio - Kenwood KDC-BT510U Bedienungsanleitung

GETTING STARTED
FACTORY RESET YES: Resets the settings to default (except the stored
station). ; NO: Cancels
CLOCK
CLOCK DISPLAY ON: The clock time is shown on the display even when the unit
is turned off. ; OFF: Cancels.
ENGLISH
Select the display language for [FUNCTION] menu and music
РУССКИЙ information if applicable.
By default, [ENGLISH] is selected.
ESPANOL
Change the crossover type
1
Press repeatedly to enter STANDBY.
2
Press and hold number buttons 4 and 5 to enter crossover
select.
The current crossover type appears.
3 Turn the volume knob to select "2WAY" or "3WAY", then
press the knob.
4 Turn the volume knob to select "YES" or "NO", then press
the knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, ( 17, 18).
Caution
Select a crossover type according to how the speakers are
connected. ( 27)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
.

RADIO

Search for a station
1
Press repeatedly to select TUNER.
2
Press repeatedly to select FM1/FM2/FM3/MW/LW.
3 Press S / T to search for a station.
• To change the searching method for S / T: Press
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6).
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item ( 6), then press the knob.
3 2
Repeat step until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press
repeatedly.
.
5
ENGLISH