Aux - Kenwood KDC-BT510U Bedienungsanleitung

CD/USB/iPod/ANDROID
Settings to use KENWOOD Remote application
KENWOOD Remote application is designed to control the KENWOOD car
receiver's operations from the iPhone/iPod (via USB input terminal).
Preparation:
Install the latest version of KENWOOD Remote application on your device
before connecting. For more information, visit
<www.kenwood.com/cs/ce/>.
You can make the settings in the same way as connection via Bluetooth.
( 15)
Other settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
USB
MUSIC DRIVE DRIVE CHANGE: The next drive ([DRIVE 1] to [DRIVE 4]) is selected
automatically and playback starts.
1 3
Repeat steps to to select the following drives.
SKIP SEARCH 0.5%/1%/5%/10%: While listening to iPod USB or ANDROID source, selects
the skip search ratio over the total files.

AUX

Preparation:
Select [ON] for [BUILT-IN AUX] for [SOURCE SELECT]. ( 4)
Start listening
1 Connect a portable audio player (commercially available).
2
Press
3
Turn on the portable audio player and start playback.
.
Set the AUX name
Default: XX While listening to a portable audio player connected to the unit...
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [SYSTEM], then press the knob.
3 Turn the volume knob to select [AUX NAME SET], then press the knob.
4 Turn the volume knob to select an item, then press the knob.
AUX (default)/DVD/PORTABLE/GAME/VIDEO/TV
5 Press and hold
To return to the previous setting item, press
Auxiliary input jack
3.5 mm stereo mini plug with "L" shaped connector
(commercially available)
repeatedly to select AUX.
to exit.
Portable audio
player
.
9
ENGLISH