Scope Of Supply; Preparation; Putting The Transmitter Into Operation - Mali Racing HotHammer 2 Anleitung

Scope of supply

a 4WD electric RC truck
LiPo-Battery, 7,4 V, 3500 mAh
Adapter for LiPo-Balancer
LiPo-Balancer
2.4 GHz 2-channel remote-control transmitter
Communication plug
Manual for the model, the remote control
unit and the speed controller

4. Preparation

Putting the transmitter into operation

Control elements und functions of the trans-
mitter
Pistol transmitter with a steering wheel for
steering and pull lever for speed
1 Antenna
2 Steering wheel for steering function
3 Joystick for driving function
4 Battery / rechargeable battery compartment
(lower side)
5 Control unit
6 PC Link (DSC Port, rear side)
7 Charging socket (rear side)
Control unit (5)
a Reverse switch steering
b Control LED
c Trim steering function
d Function switch
e Reverse switch driving function
f Undervoltage indicator
g Bind button
h Trim driving function
i Dual rate controls
Steering wheel for steering function (2)
Depending on the direction in which the wheel is
rotated (channel 1) the servo arm of the connec-
ted servo steering moves to
the right or left. And the wheels are driven in to
the right or left by the corresponding linkages.
Joystick for driving function (3)
The signal of the control lever (channel 2) controls the speed controller / the accelerator servo /brake servo and is
moved to
the front for braking and to the back for accelerating.
1
5
4
6
7
2
3
5
a
b
g e
c
f
h
i
d
25