Set The Clock And Date; Set The Initial Settings - Kenwood KDC-BT700DAB Bedienungsanleitung

GETTING STARTED
2

Set the clock and date

1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Hour Minute
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.
To set the date
7
Turn the volume knob to select [DATE FORMAT], then press the knob.
8
Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press
the knob.
9
Turn the volume knob to select [DATE SET], then press the knob.
10
Turn the volume knob to make the settings, then press the knob.
Day Month Year or Month Day Year
11 Press and hold to exit.
To return to the previous setting item, press
3

Set the initial settings

1
Press repeatedly to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
3
Turn the volume knob to select an item (see the following table),
then press the knob.
4 3
Repeat step until the desired item is selected or activated.
5
Press and hold to exit.
To return to the previous setting item, press
4
AUDIO CONTROL
SWITCH PREOUT* REAR/ SUB-W: Selects whether rear speakers or a subwoofer are
TUNER SETTING
DAB L-BAND
DAB ANT POWER
PRESET TYPE
SYSTEM
KEY BEEP*
.
SOURCE SELECT
BUILT-IN AUX
P-OFF WAIT
CD READ
.
* Not applicable if 3-way crossover is selected.
connected to the line out terminals on the rear (through an external
amplifier).
ON: Receives L-BAND ensemble during digital audio reception. ;
OFF: Cancels
ON: Supplies power to the DAB antenna. Selects when using the
supplied antenna. ; OFF: Does not supply power. Selects when using
passive antenna without booster. ( 29)
NORMAL: Memorizes one station for each preset button in each band
(FM1/ FM2/ FM3/ MW/ LW/ DB1/ DB2/ DB3). ; MIX: Memorizes one
station for each preset button, regardless of the selected band.
ON: Activates the keypress tone. ; OFF: Deactivates.
ON: Enables AUX in source selection. ; OFF: Disables. ( 17)
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in
standby mode) to save the battery.
20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ;
– – –: Cancels
1: Automatically distinguishes between audio file disc and music CD. ;
2: Forces to play as a music CD. No sound can be heard if an audio file
disc is played.
Default: XX