Kenwood KDC-BT700DAB Bedienungsanleitung Seite 16

BLUETOOTH®
MIC GAIN –10 — +10 (–4): The sensitivity of the microphone
increases as the number increased.
NR LEVEL –5 — +5 (0): Adjust the noise reduction level until the
least noise is being heard during a phone conversation.
ECHO CANCEL –5 — +5 (0): Adjust the echo cancellation delay time until
the least echo is being heard during a phone conversation.
Answer incoming call automatically
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select [SETTINGS], then press the
knob.
3 Turn the volume knob to select [AUTO ANSWER], then press
the knob.
4 Turn the volume knob to select an item, then press the
knob.
1 to 30 (in seconds)/ OFF (default)
5 Press and hold to exit.
To return to the previous setting item, press
Make a call
You can make a call from the call history, phonebook, or
dialing the number. Call by voice is also possible if your mobile
phone has the feature.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the
following table), then press the knob.
3 2
Repeat step until the desired item is selected/activated
or follow the instructions stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press
14
Default: XX
CALL HISTORY
PHONE BOOK
.
NUMBER DIAL
VOICE
BATT LOW/ MID/ FULL * : Shows the strength of the battery.
NO SIGNAL/ LOW/ MID/ MAX * : Shows the strength of the current received signal.
.
* Functionality depends on the type of the phone used.
(Applicable only if the phone supports PBAP)
1 Press the volume knob to select a name or a phone number.
• "I" indicates call received, "O" indicates call made, "M" indicates call missed.
• Press DISP to change the display category (NUMBER or NAME).
• "NO DATA" appears if there is no recorded call history.
2 Press the volume knob to call.
(Applicable only if the phone supports PBAP)
1 Turn the volume knob quickly to enter alphabet search mode (if the phonebook
contains many contacts).
The first menu (ABCDEFGHIJK) appears.
• To go to the other menu (LMNOPQRSTUV or WXYZ1
• To select the desired first letter, turn the volume knob or press S / T, then
press the knob.
Select "1" to search with numbers and select "
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob to call.
• The phonebook of the connected phone is automatically transferred to the unit
when pairing.
• Contacts are categorized as: HM (home), OF (office), MO (mobile), OT (other),
GE (general)
• This unit can display only non-accent letters. (Accent letters such as "Ú" is showns as
"U".)
1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).
2 Press S / T to move the entry position.
1 2
Repeat steps and until you finish entering the phone number.
3 Press the volume knob to call.
Speak the name of the contact you want to call or the voice command to control the
phone functions.
( 15, Make a call using voice recognition)
), press J / K.
*
* " to search with symbols.