Herunterladen Inhalt Inhalt Diese Seite drucken

Pkm GS 71 Bedienungsanleitung Seite 25

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

10. Connect the appliance to the mains properly.
11. The nameplate is situated inside the appliance or at the back.
WARNUNG! Unplug the appliance before you change the hinge position.
Empty the appliance.
1. Remove the covers (11) and the screws of the worktop (10).Remove the
worktop and part 8.
2. Tilt the appliance slightly backwards and secure it in this position to get access
to the bottom hinges.
3. Remove the two screws (1) which clamp the bottom hinge on the door casing.
Unscrew the adjustable foot (3). Remove the left adjustable foot (4) and install it
on the opposite (right) side.
4. Open the door a bit and remove it from the bottom hinge. Remove the spring
(5) from the opening on the top right side and the pin (6) on the top right side
of the door.
5. Remove the anchor cap (7) from the top left door opening and insert it firmly in
the opening of the top right side.
6. Insert the pin (6) in the opening on the top left side of the door. Then insert the
spring (5) in the relevant opening on the top left side.
7. Replace the door. Check that the pin (6) matches the relevant opening on the
bottom side of the upper doorway.
8. Fix the bottom hinge (2) with the door closed and tighten the screws (1).
9. Fix the worktop (9) and part 8. Tighten the screws (10). Reinstall the covers
(11).
Changing of the hinge position
Carry out the change with at least 2 persons.
25

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis