Auto-Accessing The First Channel; (De)Activating The Switching Via Front Buttons - Guntermann & Drunck DVIMUX8-USB Installationsanleitung

Configuration

Auto-accessing the first channel

Usually, after turning on the device, the recently active channel is accessed. The set-
ting can be changed so that the computer connected to the first channel is automati-
cally accessed when the device is turned on.
How to disable/enable the automatic access of the first channel after booting:
NOTE: Use the setup menu to enable/disable the option to automatically access
the first channel after booting the device.
1. Use the terminal emulator to establish a connection to the KVM switch.
If the setup menu is not displayed, the Switch mode of the service port is
enabled. Enter »
2. Use the Arrow
3. Press the Space
No  accesses the recently active channel after booting
Yes  accesses channel 1 after booting
4. Press the S

(De)activating the switching via front buttons

In the defaults, you can use the buttons on the front panel to switch between the
computers.
If desired, you can deactivate the front buttons in the setup menu.
How to enable/disable the switching via front buttons:
HINWEIS: Use the setup menu to (de)activate the switching via front buttons.
1. Use the terminal emulator to establish a connection to the KVM switch
and connect the serial data cable to the Service socket.
2. Use the
Arrow
Select Channel via Front Button
3. Press the
Space
 disables the switching via front button
Yes
 enables the switching via front button
No
4. Press the
S
24 · G&D DVIMUX8-USB
#! « to switch to the setup menu.
or Arrow keys to select the
key (repeatedly) to choose between the following options:
key to save your settings.
or keys to select the
Arrow
entry.
key (repeatedly) to choose one of the following options:
key to save your settings.
Select Ch.1 after Power up entry.