Technical Data; Maintenance And Routine Care; Control Arms And Cleaving Cross Installation - Gude DHH 1050/7 T MBS Bedienungsanleitung

2. Technical Data

Technical Data
h x w x l
Wood maximum length
Wood maximum diameter
Maximum cylinder stroke
Rated cleaving force
Forward movement speed
Backward movement speed
Oil capacity
Mode of operation
Hydraulic pressure
Weight
Motor power P1
Output shaft speed
Product No.

3. Maintenance and Routine Care

Always keep the machine clean.
Change the hydraulic oil every 500 operating hours. Use commonly sold hydraulic
oil (HLP 46). Grease the cleaving column before every use to increase the service
life of sliding jaws. Only genuine spare parts should be used for replacement.
Check hydraulic houses and hose connections for leakage and rupture on a regular
basis.
Caution: Always replenish the oil with the cleaving column retracted !
Grease the cleaving column !

4. Control Arms and Cleaving Cross Installation

Control Arms
1
2. Insert the hold-in stud through
in front of the cross member.
Type 1050/7 T MBS
1540 x 600 x 900 mm
1040 mm
400 mm
515 mm
7 t
ca 0,05 m/s
ca 0,1 m/s
ca 4 litres
S
6
220 bar
ca 150 kg
4,8 kW (6,5 PS)
----
01954
1. Insert the control arm and tuck the pipe in the cross member
Grease
well.
TIP: Before doing that, grease the metal lap plates up and
down!
2
3
2a
GB